Equipment features
One platform for metal and non-metal cutting
A mixed-material machine uses a CO₂ source and switches the cutting setup between metal and non-metal work. The glass tube covers the common non-metal jobs; the optional RF metal tube is used where the process calls for it. That combination is what lets one machine handle acrylic and MDF alongside thin metal sheet.
Steel welded frame
- A welded steel frame gives the rigidity the gantry needs on long shifts.
- Designed to hold alignment under continuous production use.
Multifunctional cutting head
- The head is set up for metal and non-metal material in the same machine.
- Changeover is a configuration step, not a second machine.
Fixed optical path compensation
- Beam compensation keeps spot quality consistent across the whole cutting area.
- Cut appearance stays even from the centre to the edge of the table.
Imported guide and ball screw
- Linear guides and ball screws replace belt transmission for rigidity and repeatability.
- Higher transmission torque with vibration suppressed during acceleration.
Touch-screen motion controller
- Self-developed controller with touch-screen operation and automatic focusing.
- Focus adjustment supports different material thicknesses without manual resetting.
CO₂ source options
- Glass tube as standard; RF metal CO₂ tube available as an option.
- Peak power 150 / 200 / 300 / 400 / 600 W by configuration.
Applications
Mixed material cutting
The machine is specified where one workshop cuts both metal sheet and non-metal sheet, and where buying two machines is not justified by the volume of either.
Materials
Carbon steel, stainless steel, acrylic, MDF and similar non-metal sheet on the mixed configuration. Non-metal material such as wood, acrylic, leather, cloth and rubber is cut with the CO₂ source; the metal side is limited to thin sheet compared with a fiber machine, so the gauge is confirmed with the sample.
Technical specifications
Technical Specifications
| Laser Type | CO2 Glass Laser Tube/(RF Metal CO2 Laser Tube Optional) |
|---|---|
| Peak Laser Power | 150W/200W/300W/400W/600W (Optional ) |
| Wavelength | 10.6um |
| Cutting Speed | Max.30M/Min |
| Focal Length | 50.8,63.5,76.2,127MM |
| Cooling Mode | Water Cooling and Protection System |
| Location Precision | 0.05mm |
| Min.Line Width | 0.15-0.3mm |
| Controlling Formats Supported | DSP High Speed Controller |
| Graphic Formats Supported | PLT,DST,AI,DXF,BMP,JPG,CAD,CDR,DWG |
| Operating temperature | 0℃-40℃ |
| Humidity | 5% to 85% (No Condensed ) |
| Gross Power | <4000W |
| Power source | AC110V/220V± 10%, 50/60HZ |
| Processing Area | 1300*900mm(Optional) |
| Working Environment | Clean, Free of Dust |
Values describe the standard configuration with a glass tube. The RF metal tube option changes the power range and the material response — the configuration is fixed against your samples.
Metal and non-metal on the same table
The limit of a mixed machine is on the metal side: CO₂ cuts thin metal but not the plate gauges a fiber source handles. Where most of the work is non-metal with occasional thin metal, one machine is enough. Where metal is the main product, a fiber machine is the better fit — tell us the split between the two and we will say which way the configuration should go.
Configuration & support
Matching the machine to your work
Laser sourceCO₂ glass tube standard; RF metal tube optional.
Peak power150 / 200 / 300 / 400 / 600 W by configuration.
Working areaConfirmed with the sheet format you cut.
Material testSamples of both metal and non-metal cut before quotation.
Request a quote
Tell us what you cut
Share the material mix, the thickness of each, and the sheet format. HODA reviews whether the mixed configuration covers your work and confirms the source, power and quotation for the metal and non metal laser cutting machine.
Product / model: Metal and Non Metal Laser Cutting Machine
