Equipment features
Automatic feeding with twin cutting heads
The machine feeds material into the cutting area automatically and cuts with two heads at the same time. That combination is aimed at soft material — textiles, leather, foam and similar goods — where the same shape is cut many times and loading time is the real cost. Feeding instead of clamping also avoids the material waste that comes from re-setting a sheet by hand.
Automatic material feeding
- Material advances through the machine without manual re-loading per part.
- Built for repeat orders where the same shape runs in volume.
Twin cutting heads
- Two heads cut in the same pass to double output on the same material width.
- Head spacing and layout are set for the part size being produced.
CO₂ glass tube 70–150 W
- Peak power 70 / 80 / 100 / 130 / 150 W by configuration.
- 10.6 µm wavelength suits organic and synthetic non-metal material.
DSP high-speed controller
- DSP controller drives the cut path at up to 64 000 mm/min.
- Files come in from PLT, DST, AI, DXF, BMP, JPG, CAD, CDR and DWG.
Clean edge on soft material
- The CO₂ process seals the cut edge on textiles and synthetic fabric.
- Sealed edges reduce fraying compared with mechanical cutting.
Continuous curve cutting
- Speed stays stable through curves rather than dropping on direction changes.
- Suits shapes with long curved outlines and repeated contours.
Applications
Soft material cut in volume
The machine is chosen when the material arrives in roll or continuous sheet and the same pattern repeats through the shift.
Materials
Rubber, plastic, acrylic, cloth, leather, woollen fabric, ceramic tile, crystal, jade, bamboo and wooden products and other non-metal materials. Soft and roll material is where automatic feeding gives the largest gain; rigid sheet can also be cut but gains less from the feeder.
Technical specifications
Technical Specifications
| Laser Type | CO2 Glass Laser Tube/(RF Metal CO2 Laser Tube Optional) |
|---|---|
| Peak Laser Power | 70W/80W/100W/130W/150W |
| Wavelength | 10.6um |
| Working Mode | Double Heads Cutting |
| Feeding Mode | Automatic |
| Cutting Speed | 0-64000mm/min |
| Local Length | 38.1,50.8,63.5,76.2,101.6MM |
| Location Precision | 0.015mm |
| Min.Line Width | 0.15-0.3mm |
| Cooling Mode | Water Cooling and Protection System |
| Graphic Formats Supported | PLT,DST,AI,DXF,BMP,JPG,CAD,CDR,DWG |
| Controlling System | DSP High Speed Controller |
| Operating temperature | 0℃-40℃ |
| Humidity | 5% to 85% (No Condensed ) |
| Gross Power | <1250W |
| Power source | AC110V/220V± 10%, 50/60HZ |
| Processing Area | 600*400MM |
| Working Environment | Clean, Free of Dust |
Values describe the standard configuration. Cutting speed and achievable detail depend on material, thickness and the number of heads in use.
Feeding, heads and throughput
Throughput on this machine is set by how the material is fed, not only by cutting speed. Two heads cutting the same material width double the output per pass, while automatic feeding removes the loading stop between parts. Tell us the material width, the part size and the shift volume, and the head layout and working area are matched to that.
Configuration & support
Matching the machine to your work
Peak power70 / 80 / 100 / 130 / 150 W by configuration.
Working modeTwin heads cutting, spacing set for the part size.
FeedingAutomatic material feeding; format confirmed with the roll or sheet.
Material testSample material cut before the configuration is fixed.
Request a quote
Send the material and part size
Share the material type, width, thickness and the part drawing, plus the volume per shift. HODA confirms the head layout, working area and quotation for the auto-feeding CO₂ laser cutting machine.
Product / model: Auto-Feeding CO₂ Laser Cutting Machine
