Equipment features
Camera positioning plus automatic feeding
On printed or patterned material the cut has to line up with artwork that shifts from piece to piece. A CCD camera finds the registration marks and offsets the cut path to match, while the feeder advances the material. That combination is what makes contour cutting of printed work repeatable without re-datuming every piece by hand.
CCD camera positioning
- A 3.2 million pixel camera reads the position of the artwork before cutting.
- The cut path is offset to the detected position instead of a fixed table origin.
Automatic feeding
- Material advances after each cut without manual re-loading.
- Suited to roll and continuous stock with repeating printed patterns.
Automatic focus adjustment
- Focus distance is set automatically for the material in use.
- Removes manual focus resetting between material thicknesses.
DSP high-speed controller
- Cutting speed up to 64 000 mm/min under DSP control.
- PLT, DST, AI, DXF, BMP, JPG, CAD, CDR and DWG files are accepted.
Pattern and label cutting
- Intended for printed labels, appliqué and digital print finishing.
- Registration follows the printed mark, so pattern drift does not accumulate.
CO₂ glass tube 80–150 W
- Peak power 80 / 100 / 130 / 150 W by configuration; RF metal tube optional.
- 10.6 µm source for non-metal material.
Applications
Printed and patterned material
The camera earns its place where the cut has to find the print, not where the print is placed to the cut.
Materials
Plastic, acrylic, cloth, leather, woollen fabric and other non-metal materials, in printed or plain form. Camera positioning is only useful when there is a mark or pattern to find — for plain material a standard CO₂ machine does the same job.
Technical specifications
Technical Specifications
| Laser Type | CO2 Glass Laser Tube/(RF Metal CO2 Laser Tube Optional) |
|---|---|
| Peak Laser Power | 80W/100W/130W/150W (Optional ) |
| Wavelength | 10.6um |
| CCD Resolution Ratio | 3,200,000pixels |
| Focusing Method | Automatic Adjust Focus Distance |
| Cutting Speed | 0-64000MM/Min |
| Focal Length | 38.1,50.8,63.5,76.2,101.6MM |
| Location Precision | 0.015mm |
| Min.Line Width | 0.15-0.3mm |
| Cooling Mode | Water Cooling and Protection System |
| Controlling Formats Supported | DSP High Speed Controller |
| Graphic Formats Supported | PLT,DST,AI,DXF,BMP,JPG,CAD,CDR,DWG |
| Operating temperature | 0℃-40℃ |
| Humidity | 5% to 85% (No Condensed ) |
| Gross Power | <1250W |
| Power source | AC110V/220V± 10%, 50/60HZ |
| Processing Area | 900*600mm(Optional) |
| Working Environment | Clean, Free of Dust |
Values describe the standard configuration. Registration accuracy depends on the printed mark, contrast and material movement, so samples are tested before the configuration is fixed.
How registration works on this machine
The camera locates the artwork, the controller offsets the cut file to that position, and the feeder advances the material to the next repeat. Registration quality depends on the mark being readable and the material not distorting between the camera and the cutting head. Send a sample of the actual printed material with the cut file and we will confirm what the system holds.
Configuration & support
Matching the machine to your work
Vision system3.2 million pixel CCD camera; HD projector option.
Peak power80 / 100 / 130 / 150 W by configuration.
FeedingAutomatic, matched to the roll width and repeat length.
Registration testPrinted sample cut and returned before quotation.
Request a quote
Send a printed sample
Share the printed material, the registration mark, the cut file and the repeat length. HODA tests registration on your sample and confirms the camera setup and quotation for the CCD auto-feeding laser cutting machine.
Product / model: CCD Auto-Feeding Laser Cutting Machine
