Equipment features

Large-format three-axis dynamic-focus CO₂ marking

The HODA HD-3A Series uses three-axis dynamic focusing for CO₂ laser processing across a large working area. It is configured for suitable wood and packaging applications, including large-area marking and partial-depth cutting where the material and design allow.

Three-Axis Dynamic Focusing

The focusing system supports laser scanning across a large working field
Maintains focus over the full working area without moving the workpiece

Standard 600 × 600 mm Field

Standard processing area: 600 × 600 mm.

Optional 800 × 800 mm Field

Available for applications that require a larger working area

Large-Area Marking

For suitable non-metal workpieces where the required design extends over a larger area

Partial-Depth Cutting

Can be assessed on compatible materials when the required cut depth and remaining layer are specified
Confirm the substrate, thickness, target depth and acceptable result by testing

Factory-Configured Integration

Available accessories and automation projects are matched to the application
Integration and parameter tuning are handled with the factory

Processing samples

Processing examples

A selection of samples processed with HODA CO₂ systems — large-area denim marking, paper cut-out and footwear cut-out.

Large-format CO2 laser processing sample: decorative pattern processed on denim fabric — **Large-area denim marking**Decorative pattern processed on denim fabric.

CO2 laser cut-out sample: lace pattern cut from a paper card — **Paper cut-out**Lace pattern cut out from a paper card.

CO2 laser cut-out sample: cut-out pattern on footwear — **Footwear cut-out**Cut-out pattern on footwear.

Results depend on the material and the process settings. Applications are confirmed by testing the actual material.

Applications

Where the HD-3A is used

The HD-3A is selected when the workpiece, the design or the production requirement calls for a large processing area.

Wood MarkingLarge-area text, graphics and decorative patterns on suitable wood products, subject to sample testing.

Packaging MaterialsMarking and decorative processing on compatible packaging substrates; material composition and finish must be assessed.

Large-Format GraphicsProcessing of larger designs within the selected working field on suitable non-metal materials.

Partial-Depth CuttingControlled processing where a partial cut is required. Confirm the substrate, thickness, target depth and acceptable result by testing.

Technical specifications

HD-3A series technical parameters

Laser & processing
Series	HD-3A
Laser power	100 W / 150 W / 300 W
Laser type	RF CO₂ laser source
Wavelength	10.6 μm
Focusing system	Three-axis dynamic focusing
Standard processing area	600 × 600 mm
Optional processing areas	400 × 400 mm, 800 × 800 mm, 1000 × 1000 mm, 1200 × 1200 mmOptional
Marking speed	≤ 8000 mm/s
Marking depth	≤ 2 mm
Repetition precision	± 0.01 mm
Min. line width	0.01 mm
Min. character	0.2 mm
Processing	Large-area marking and application-tested partial-depth cutting
Marking content	Text, logos, serial numbers, barcodes, QR codes and graphics
Supported file formats	Vector: PLT, DXF, AI, DST, SVG, GBR, NC, JPC, BOT, DWG, EPS, EMF, WMF. Bitmap: BMP, JPG, JPEG, GIF, TGA, PNG, TIF, TIFF, PSD, PCX.
Cooling	Configuration-dependent; confirmed with the factory for the selected power
Electrical & environment
Power supply	AC 110/220 V ±10%, 50/60 Hz
Gross power	< 500 W
Operating environment	Temperature 10–40 °C, humidity 5–85% (clean, low dust, no condensate)

The figures above are the current catalogue reference values for the HD-3A series. Large-area marking and partial-depth cutting results depend on the material, the thickness and the process settings, so the achievable result is confirmed by testing the actual workpiece.

Materials

The HD-3A processes suitable wood, packaging substrates and other compatible non-metal materials. Material composition and the required result are assessed by testing.

Where it is used

Typical uses: wood product marking, packaging and paper goods, large-format decorative graphics, and application-tested partial-depth cutting.

Configuration & support

How the HD-3A is supplied

Working field options600 × 600 mm standard; 800 × 800 mm available as an option.

Optional accessoriesAccessories and automation projects are matched to the application.

Factory tuningIntegration and parameter tuning are handled with the factory.

Optional accessories and automation integration are not part of the standard machine configuration. Tell us your material, workpiece size and required result when requesting a quote so we can confirm a suitable configuration.

Application review

Send us your workpiece & required result

Send us your material, workpiece dimensions, artwork and required marking or partial-depth cutting result. HODA can review the working area, arrange sample testing and confirm a suitable HD-3A configuration.

Product / model: HD-3A Dynamic-Focus CO₂ Laser Marking Machine

HD-3A Dynamic-Focus CO₂ Laser Marking Machine