Equipment features
Large-format CO₂ cutting for mixed material
This model takes the mixed-material platform and puts it on a large workbench, so full sheets can be nested instead of being cut part by part. Beam compensation keeps the cut consistent from the centre of the table to its edges, which is the point of the larger format.
Large-format workbench
- The table is sized for full-sheet layouts rather than single parts.
- Nesting across the whole sheet reduces offcuts on repetitive work.
Fixed optical path compensation
- Spot quality is compensated across the full cutting area.
- Edge-to-edge consistency is what makes a large table usable, not just bigger.
Multifunctional cutting head
- Set up for metal and non-metal material on the same machine.
- Changeover between material types is a configuration step.
Steel welded frame
- Welded steel frame for rigidity across the wider gantry span.
- Intended to hold alignment during continuous production.
Touch-screen motion controller
- Self-developed controller with touch-screen operation and automatic focusing.
- Focus follows material thickness without manual resetting.
CO₂ source options
- Glass tube as standard; RF metal CO₂ tube available.
- Peak power 150 / 200 / 300 / 400 / 600 W by configuration.
Applications
Full-sheet cutting in signage and die work
A large table earns its cost when parts are nested across the sheet and the same layout repeats from order to order.
Materials
Acrylic, MDF, wood, die board, leather, cloth, rubber and similar non-metal sheet, plus thin metal sheet on the mixed configuration. The metal side is limited to thin gauge; for production metal cutting a fiber machine is the correct tool.
Technical specifications
Technical Specifications
| Laser Type | CO2 Glass Laser Tube/(RF Metal CO2 Laser Tube Optional) |
|---|---|
| Peak Laser Power | 150W/200W/300W/400W/600W (Optional ) |
| Wavelength | 10.6um |
| Cutting Speed | Max.30M/Min |
| Focal Length | 50.8,63.5,76.2,127MM |
| Cooling Mode | Water Cooling and Protection System |
| Location Precision | 0.05mm |
| Min.Line Width | 0.15-0.3mm |
| Controlling Formats Supported | DSP High Speed Controller |
| Graphic Formats Supported | PLT,DST,AI,DXF,BMP,JPG,CAD,CDR,DWG |
| Operating temperature | 0℃-40℃ |
| Humidity | 5% to 85% (No Condensed ) |
| Gross Power | <4000W |
| Power source | AC110V/220V± 10%, 50/60HZ |
| Processing Area | 1300*900mm(Optional) |
| Working Environment | Clean, Free of Dust |
Values describe the standard configuration. Working area is quoted against the sheet format you buy — tell us the full-sheet size and the nesting layout.
Format, nesting and cut consistency
On a large table the question is not only how big the sheet is, but whether the cut stays the same at the far corners. Beam compensation and a rigid welded frame are what hold that. Send the sheet format and a typical nesting layout; working area and power are then quoted against the actual job rather than the catalogue.
Configuration & support
Matching the machine to your work
Laser sourceCO₂ glass tube standard; RF metal tube optional.
Peak power150 / 200 / 300 / 400 / 600 W by configuration.
Working areaQuoted against your full-sheet format and nesting layout.
Material testFull-sheet sample cut before the configuration is fixed.
Request a quote
Send the sheet format and layout
Share the sheet size, material, thickness and a typical nesting layout. HODA confirms the working area, source and quotation for the large format mixed CO₂ laser cutting machine.
Product / model: Large Format Mixed CO₂ Laser Cutting Machine
