Equipment features
Fiber laser cutting for metal sheet
The laser beam is focused onto the sheet surface and moved by the CNC system, so the cut contour comes directly from the drawing file. The machine uses a fixed worktable with the cutting head travelling over the working area.
Fiber laser source, 1070 nm
- Power options from 500 W to 10 000 W, chosen by material and thickness.
- Beam is focused to a small spot and moved by the CNC system for contour cutting.
Working areas in five formats
- 2 500×1 300 / 3 000×1 500 / 4 000×2 000 / 6 000×1 500 / 6 000×2 000 mm.
- Larger formats allow full-sheet nesting for bigger panels.
Gantry gear-rack double drive
- Both sides of the gantry are driven together to keep the beam square to the table.
- Positioning accuracy is confirmed for the selected configuration.
Water cooling with protection system
- A water chiller maintains laser source temperature during continuous cutting.
- The protection circuit monitors the cooling loop and stops the source if it faults.
Parameters confirmed per configuration
- Cutting speed, positioning accuracy and power consumption are confirmed for the selected configuration.
- Tell us the material, thickness and edge requirement so the machine can be quoted against your work.
Drawings straight from CAD
- PLT, AI, DXF, CAD, CDR and DWG files are read by the control software.
- Cutting parameters are set per material and thickness, then saved as a job.
Applications
Metal sheet and plate cutting in fabrication work
The fixed worktable suits work where the part comes from flat sheet or plate and the outline changes from order to order — blanks, cut-outs, brackets and panels.
Materials
Stainless steel, carbon steel, manganese steel, galvanised sheet, alloy plate and rare metals, in sheet and plate form. Thickness limits depend on the selected laser power — tell us the material and gauge and we will confirm the power class and cutting parameters.
Technical specifications
Technical Specifications
| Laser Power | 500W,1000W,1500W,2000W,3000W,6000W,10000W |
|---|---|
| Laser Type | Fiber Laser |
| Wavelength | 1070nm |
| Cooling Mode | Water Cooling and Protection System |
| Drive System | Gantry gear rack double-drive |
| Graphic Formats (control software) | PLT,AI,DXF,CAD,CDR,DWG |
| Working Humidity | 5%-85%,(No condensation) |
| Working Temperature | 0-40℃ |
| Working Environment | Clean,free of dust |
| Processing Area | 2500*1300MM/3000*1500MM/4000*2000MM/6000*1500MM/6000*2000MM |
Power supply, total power consumption, positioning accuracy and cutting speed are confirmed for the selected configuration.
Selecting power and working area
Two choices decide most of the configuration. Working area follows the largest sheet you buy: 2 500×1 300 mm covers standard 4×8 ft sheet, while 6 000×2 000 mm allows full-format nesting for larger panels. Laser power follows the thickest cut you need, not the thinnest. Send a drawing set with materials and gauges and both can be fixed before quotation.
Configuration & support
Matching the machine to your work
Laser power500–10 000 W — matched to the thickest cut for your work.
Working areaFive table formats, from 2 500×1 300 to 6 000×2 000 mm.
Cutting testSend sheet samples with drawings; HODA cuts them and returns the result.
Request a quote
Request a Cutting Solution and Quote
Tell us your material, thickness, sheet size and production requirements. You may attach a JPG, PNG or PDF file up to 5 MB. For CAD drawings, please attach a PDF export or screenshot first.
Product / model: Fiber Laser Cutting Machine
