Equipment features
Cabinet-style fiber laser marking workstation
HD-F is a cabinet-style fiber laser marking workstation. The laser source and the control system are housed in the cabinet, and the marking head is mounted on the Z-axis column above an open marking area. Marking is a non-contact process — the lens never touches the workpiece.
Cabinet-style workstation
- Fiber laser source and control system are housed in the cabinet
- The marking head is mounted on the Z-axis column, above an open marking area
- Workpieces are placed by hand; air cooling, no external water chiller
Non-contact marking
- The lens marks the surface without touching the workpiece
- Suitable for most metals and some non-metals, including coated and anodised surfaces
- Useful for small or finished parts
Adjusts to the workpiece
- Z-axis lifting column for workpieces of different heights
- Focusing lens and marking area are selected to suit the part
- Optional rotary device for cylindrical parts such as rings, shafts and sleeves
Software & File Compatibility
- Runs common graphics files: PLT, DST, AI, DXF, BMP, JPG, CAD, CDR, DWG
- Supports TTF fonts
- Text, serial numbers and QR codes are prepared in the marking software
Laser safety goggles and a rotary device for cylindrical parts are available as optional accessories.
Marking samples
Marking examples
A selection of marking samples from HODA — part numbers, serial numbers, QR codes and logos on metal, anodised and plastic parts.
For plastics, coatings and anodised surfaces we recommend a material test before ordering.
Technical specifications
HD-F series technical parameters
| Laser & processing | |
|---|---|
| Model | HD-F10 / HD-F20 / HD-F30 / HD-F50 / HD-F100 / HD-F200 |
| Laser power | 10 W / 20 W / 30 W / 50 W / 100 W / 200 W |
| Laser type | Fiber laser |
| Wavelength | 1064 nm |
| Processing area | 70×70 / 110×110 / 160×160 / 300×300 mmOptional |
| Frequency range | 20–200 kHz |
| Beam quality | < 1.6 |
| Marking speed | ≤ 8,000 mm/s |
| Marking depth | ≤ 2 mm |
| Repetition precision | ± 0.01 mm |
| Min. line width | 0.01 mm |
| Min. character | 0.2 mm |
| Operation & power | |
| Cooling mode | Air cooling |
| Lifting height | 100–500 mmOptional: 700 mm |
| Graphic formats | PLT, DST, AI, DXF, BMP, JPG, CAD, CDR, DWG |
| Power source | AC 110 / 220 V ±10%, 50 / 60 Hz |
| Gross power | < 500 W |
| Work environment | 10–40 °C, humidity 5–85%, clean with low dust |
The HD-F series covers several laser powers and lens options, so the specification depends on the configuration selected. Marking speed, depth and precision are reference values — actual results depend on the material, the lens and the parameters used.
Materials
HD-F marks most metals and some non-metals, including high-hardness alloys, oxides, electroplated and coated surfaces, ABS, epoxy resin, engineering plastics and oil films. Results vary with the material, the surface finish and the parameters used.
Where it is used
Typical users: electronics and communication equipment, automotive and motorcycle parts, hardware and tools, instruments and meters, medical devices and packaging.
Optional configuration
Options for different workpiecesOptional
Laser gogglesEye protection for the operator during marking
F-theta lensFocusing lens for 1064 nm fiber laser marking (F=330 mm shown)
Rotary deviceRotary fixture with three-jaw chuck for cylindrical parts
Gold cutting jigFixture with a linear stage for gold and jewellery work
Accessories are quoted separately and are not part of the standard machine configuration. Please tell us your workpiece when requesting a quote so we can confirm which options you need.
Request a quote
Tell us what you need to mark
Send us the material, the workpiece size and your expected output. Our engineers will come back with a recommended laser power, lens and configuration for your application.
Product / model: HD-F Fiber Laser Marking Machine
